Storage · high

How to fixSATA-CRC-ERR

Data transfer error on SATA cable

What this error means

This high-severity issue affects the storage drive (SSD/HDD). Data is lost during cable transmission, indicating a damaged connector. This usually traces back to power outages and high temperatures in the M.2 slot. Follow the steps below to fix it.

Before you begin

Save open work and back up important files. Note any recent driver or hardware changes. If Windows cannot start, use the startup guide first.

Work through these checks

0 of 3 complete
01Back up all data immediately

Back up all data immediately.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help
02Try replacing the SATA data cable

Try replacing the SATA data cable.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help
03Run manufacturer diagnostics

Run manufacturer diagnostics.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help

Possible causes

  • End of life (age)
  • Defective cable
  • Power outages
  • High temperatures in the M.2 slot